秒速飞艇在线投注

Re-designed from the ground up to give customers the best white ink possible. International Coatings believes that their R&D department exceeded expectations, making the 7014 Legacy White one of the best white inks in the market today. In fact, when tested, 7014 Legacy White outperformed competitors' inks. Press ready and is very opaque with the subsequent print producing a matte finishHas good bleed blocking characteristicsCan be used on 100% cotton and 50/50 poly/cotton blendsIs very creamy,...

7022 Cool White™ is a low bleed white that is part of the FlexCure™ line of inks.  It can cure from 275° to 325°F.    This will allow it to work as both a low cure and standard plastsiol ink.  You can match your cure temperature to the substrate and not have to worry about the cure temperature Press ready and is very opaque with the subsequent print producing a matte finishHas good bleed blocking characteristicsCan be used on 100% cotton, poly/cotton blends, 100%...

International Coatings' lowest bleed white formulated for tough to print polyester or polyester blend fabrics. (As with all low bleed inks, preprint and test all fabrics to be used for dye migration, ink adhesion, wash fastness and other desired properties before beginning any production.) The 741 Ultra Low Bleed Polyester white is part of the FlexCure line and can be cured between 275°-325°F.

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up. Kit Includes: 2 Quarts 7538 Mixing White1 Pint 7519 Fl. Magenta 1 Quart 7536 Black1...

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up.Kit Includes: 2 Gallons 7538 Mixing White1 Quart 7519 Fl. Magenta 1 Gallon 7536...

717 Ultimate Black (formerly know as "Jet Black") is a high performance plastisol screen printing ink with a wide latitude for cure temperature. It can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at 325°F.  717 Ultimate Black provides a deep black color that is very creamy, short-bodied and is easy to print on automatic or manual presses. 717 Ultimate Black can produce a matte or glossy finish, depending on the amount of ink laid...

Pro-Brite Process Inks are more opaque than standard process inks. Standard process colors because they are more translucent can sometimes appear dull and thin. Pro-Brite Process Inks have more body rendering more vibrant prints.

Pro-Brite Process Inks are more opaque than standard process inks. Standard process colors because they are more translucent can sometimes appear dull and thin. Pro-Brite Process Inks have more body rendering more vibrant prints.

Pro-Brite Process Inks are more opaque than standard process inks. Standard process colors because they are more translucent can sometimes appear dull and thin. Pro-Brite Process Inks have more body rendering more vibrant prints.

Pro-Brite Process Inks are more opaque than standard process inks. Standard process colors because they are more translucent can sometimes appear dull and thin. Pro-Brite Process Inks have more body rendering more vibrant prints.

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up. Recommended Fabrics:Light colored 100% cotton or some cotton/polyester blends. Use...

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up. Recommended Fabrics:Light colored 100% cotton or some cotton/polyester blends. Use...

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F.  These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the...

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...